The compact Camera Link fiber Adapter. Can be used from base to medium to full-extended configuration.
Warning: Last items in stock!
The PHIRE system is a compact converter system for the Camera Link interface to optical fibre and back. The PHast range uses duplex fibres. With two different pixelclock ranges of PHast all Base Medium and Full Interface camera are supported, up to 10 taps x8 bit with a maximum throughput of 670Mbyte/s.These systems are also called fibre adapters, camera link fibre adapters and camera link extender, meaning all the same.
|Voltage||DC 5 ~ 24V|
|Current||430mA @ 12V|
|Power consumption||2,4W per Unit|
|Plug Type||Hirose MQ172X-4PA|
Camera Link Interface
All Systems use the MDR26 plug for the CL connection to camera and frame grabber.
Optical Interface for Multimode Duplex Fiber
|Min Optical Tx output Power||-10 dBm|
|Min Optical Rx Power||-15 dBmPlug Type|
|LC duplex||Fiber Type|
|50/125µm or 62.5/125µm MM Fiber|
|Model Name||Max Pixel Clock||Max. Data Format||Sensor Typ|
|PHT-PHF-66-M025||24~66MHz||10 Taps, 8Bit||Line and Area Scan|
|PHT-PHF-85-M025||60~85MHz||10 Taps, 8Bit||Line and Area Scan|
1x CM-Base (transmitter))
1x CM-Full (transmitter))
2x 12V DC output international wall mount AC/DC power adapters with snap locking plug
The virtual serial port of the Framegrabber is need to configure the PHast System once. If the framegrabber does not support the virtual serial port a adapter, PHT-PHF-CONF-01, is available for this purpose.
Suitable CL-Cables Glasfaserkabel are on our web page available.
Distance depending on fibre type and system design. Transmission distance above is estimated minimum distance for 50/125 MM fibre and 9/125 SM fibre. Extra optical losses in the system will reduce the transmission distance.