Proven laser beam profiler system with low-noise CCD sensor. Especially suitable for the measurement of small laser beams.
Warning: Last items in stock!
Availability date: 08/25/2016
The WinCamD-system is the standard CCD system for laser beam analysis. It has an compact, high resolution 14-Bit digital camera. The camera features a 1.4 MPixel CCD-chip with 4.65 x 4.65 µm pixel size and 6.5 x 4.8 mm (1/2") full active area.
A complete system consists of the camera head, a USB2.0 interface, connecting cable (3 m) and software. The camera is powered via the USB port, so there is no need for an additional power supply.
The CCD version of the WinCamD product family is used mainly to measure small optical structures and spots of cw and pulsed lasers or other optical sources. Due to the high SNR is is also the best choise to measure the spatial distribution of very weak optical signals.
|Sensor:||1/2"CCD, 1.4 MPix|
|Pixel:||1360 x 1040 pixel, 4.65 x 4.65 µm each|
|Active area: (mm)||6.5 x 4.8|
|Measurable sources:||cw, 1 Hz - 20 kHz single pulse capture rate|
|Trigger:||auto-(optical), synchronous & variable delay, TTL-In/Out|
|-UV : (nm)||1 - 355 (additional converter optic)|
|Standard: (nm)||355 - 1150|
|-1310: (nm)||1290 - 1330 (residual responsivity, tested)|
|-IR: (nm)||1480 - 1680 (direct Phosphoros coating)|
|-IR-Adapter: (nm)||1480 - 1680|
|cw:||43.5 dB; Signal/RMS-Noise 20.000:1|
|Smallest Beam diameter: (µm)||ø 50|
|Attenuator:||1x OD Filter (OD0.5/1/2/4/5) with C-Mount thread incl.|
|Updaterate:||1-2 Hz dependend on PC and selected area size|
|PC-requirements:||1 GHz Pentium, Windows 2000/XP Pro/Vista/7, 512 MB RAM, 10 MB Drive Space, Monitor 1024 x 768 Pix.USB2.0 interface|