Wir sind für Sie da
Wunschdatum nicht ausgewählt *
Bitte nur Ziffern eingeben.
Laser beam profiler with fiber optic taper for characterizing large laser beams up to 25 mm x 25 mm.
Warning: Last items in stock!
Availability date: 08/25/2016
The TaperCamD system was designed for the analysis of extended laser beams with a compact, high resolution 12-Bit digital CMOS camera. The camera features a 4,2 MPixel CMOS-chip with 5,5 x 5,5 µm pixel size and 11,3 x 11,3 mm (1") full active area. Together with the fiber optic taper an active area of 25 x 25 mm with an effective pixel size of 12,5 x 12,5 µm can be used.
A complete system consists of the camera head, a USB3.0 interface, connecting cable (3 m) and software. The camera is powered via the USB port, so there is no need for an additional power supply.
The CMOS version of the TaperCamD product family is used mainly to measure extended optical structures and spots of cw and pulsed lasers or other optical sources. Due to the high SNR is is also the best choise to measure the spatial distribution of very weak optical signals.
The camera is compatible with all C-mount optics/lenses. As standard, the camera comes without the faceplate in front of the chip. To protect the sensor chip and to eliminate ambient light, the cameras are delivered with a ND filter in a C-mount ring. This low distortion face plate is carefully selected for laser applications and mounted at a certain angle in the mounting ring. To measure lasers of less than 400 nm wavelength, the filter has to be changed to a fused silica based attenuator.
|Wavelength||355 to 1150 nm|
|Pixel Count‚ H x V||4.2 MPixel‚ 2048 x 2048|
|Image Area||25 x 25 mm|
|Pixel Dimension||12.5 x 12.5 µm effective|
|Min. Beam (10 pixels)||~125 µm|
|Max Frame Rate*||60 Hz|
|Single Pulse Capture PRR||USB 2.0: 6.3 kHz|
USB 3.0: 12.6 kHz
|Signal to RMS Noise||2,500:1 (34 dB optical / 68 dB electrical)|
|Electronic Shutter Range||USB 2.0: 12,600:1 (41 dB)|
USB 3.0: 25,000:1 (44 dB)
|Measurable Sources||CW beams‚ pulsed sources; CW to 12.6 kHz with single pulse isolation|
Software configurable Auto-trigger‚ Synchronous & Variable Delay
|Manual Beam Attenuation||Included 2" NDXL-1‚ NDXL-2‚ NDXL-4 Neutral Density filters. Other OD values available.|
We are happy to offer a free product demonstration within Germany/Austria/Switzerland. In case of interest please contact Laser 2000 by phone or mail to arrange a presentation.