This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
Warning: Last items in stock!
Availability date: 08/25/2016
The WinCamD-system is the standard CCD system for laser beam analysis. It has an compact, high resolution 14-Bit digital camera. The camera features a 1.4 MPixel CCD-chip with 4.65 x 4.65 µm pixel size and 6.5 x 4.8 mm (1/2") full active area.
A complete system consists of the camera head, a USB2.0 interface, connecting cable (3 m) and software. The camera is powered via the USB port, so there is no need for an additional power supply.
The CCD version of the WinCamD product family is used mainly to measure small optical structures and spots of cw and pulsed lasers or other optical sources. Due to the high SNR is is also the best choise to measure the spatial distribution of very weak optical signals.
The camera is compatible with all C-mount optics/lenses. As standard, the camera comes without the faceplate in front of the chip. To protect the sensor chip and to eliminate ambient light, the cameras are delivered with a ND filter in a C-mount ring. This low distortion face plate is carefully selected for laser applications and mounted at a certain angle in the mounting ring. To measure lasers of less than 400 nm wavelength, the filter has to be changed to a fused silica based attenuator.
Special UV- converter optics (1 - 355nm) or an IR-version of the camera (up to -1360 nm or additional 1475 - 1600 nm) extend the application range of the system. As an option there is also an IR-converter optic for the telecom wavelength range around 1550nm available.
In order to measure larger beams we offer a TaperCam-version of the WinCamD. The TaperCam features a unique ordered fiberoptic bundle, mounted directly on the chip. This leads to a deformation free reduction of the incoming intensity distribution. The taper is not detachable.
|Sensor:||1/2"CCD, 1.4 MPix|
|Pixel:||1360 x 1040 pixel, 4.65 x 4.65 µm each|
|Active area:||6.5 x 4.8 mm|
|Measurable sources:||cw, 1 Hz - 20 kHz single pulse capture rate|
|Trigger:||auto-(optical), synchronous & variable delay, TTL-In/Out|
|-UV :||1 - 355 nm (additional converter optic)|
|Standard:||355 - 1150 nm|
|-1310:||1290 - 1330 nm (residual responsivity, tested)|
|-IR:||1480 - 1680 nm (direct Phosphoros coating)|
|-IR-Adapter:||1480 - 1680 nm|
|cw:||43.5 dB; Signal/RMS-Noise 20.000:1|
|Smallest Beam diameter:||ø 50 µm|
|Attenuator:||1x OD Filter (OD0.5/1/2/4/5) with C-Mount thread incl.|
|Updaterate:||1-2 Hz dependend on PC and selected area size|
|PC-requirements:||1 GHz Pentium, Windows 2000/XP Pro/Vista/7, 512 MB RAM, 10 MB Drive Space, Monitor 1024 x 768 Pix.USB2.0 interface|