Wir sind für Sie da
Wunschdatum nicht ausgewählt *
Bitte nur Ziffern eingeben.
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
By means of the described UV converter optics the measurement of the intensity distribution of UV laser radiation with standard Si-based CCD or CMOS cameras is possible.
IR converter optics for Beam Profiler for measuring intensity distribution in the NIR range between 1480 and 1600 nm.
The scanning system BeamR with rotating slots for the measurement of lasers with diameters of 0.5 microns to about 3 mm.
This optical beam reducer to be connected to the C-mount a camera WinCamD-ray analysis is used when the beam diameter of the laser is much greater than the sensor chip or of the taper.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
Laser beam profiler with fiber optic taper for characterizing large laser beams up to 25 mm x 25 mm.
Based on the patented multi plane scanning technology the scanning system the BeamMap allows the measurement of focal position, beam diameter (according to ISO 11146), divergence and the M2 factor of different focussed cw or qcw laser beams in real time.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
The Polarization Preserving Beam Sampler (PPBS) uses a dual wedge design to sample a small percentage of a beam’s power for laser beam profiling applications.
In combination with the Beam Profiler "WindCamD", the ND filter is used to attenuate or suppress the ambient light.
The BladeCam-XHR combines an extremely compact design (housing depth of only 6.5 mm) with a very high resolution of the sensor.