A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
The Line Laser Profiling System (LLPS) is a complete solution for analyzing line lasers up to 200 mm in length and down to 55 μm in width.
M2 or Beam Quality factor is a dimensionless parameter that characterizes the degree of imperfection of a real-world laser beam. The lower the value of M2 , the more tightly the beam can be focused to a small spot.
This adapter plate is also available for the Beam Profiler BeamMap and BeamR 1st generation.
By means of the described UV converter optics the measurement of the intensity distribution of UV laser radiation with standard Si-based CCD or CMOS cameras is possible.
IR converter optics for Beam Profiler for measuring intensity distribution in the NIR range between 1480 and 1600 nm.
This optical beam reducer to be connected to the C-mount a camera WinCamD-ray analysis is used when the beam diameter of the laser is much greater than the sensor chip or of the taper.
Variable attenuator for beam profiler in the ray analysis with 99 different attenuation values in the range of 1010-0 (0 to 100 dB).
Neutral density filter for the WinCamD-LCM4
In combination with the Beam Profiler "WindCamD", the ND filter is used to attenuate or suppress the ambient light.
These C-mount connection flanges (ETCM) can be easily combined with CUB, EAM and all WinCamD attenuators.
Compact attenuator with high damage threshold, reduceds incident laser radiation by 10 orders of magnitude.