LanTEK® II Series Cable Certifier

LanTEK® II Series Cable Certifier

Features

• Best price/performance options - models ranging from 350 MHz to 1000 MHz for Category 6/ISO E through Category 7A/ISO FA certification
• High speed testing saves time and money
• Most internal memory available - store over 1700 Category 6/ISO E tests with graphs
• Patented testing method - eliminate expensive permanent link adapters and test with patch cords for most installation
• Extraordinary fast fiber testing with FiberTEK® FDX - the first dual wavelength, bidirectional fiber certification tool
• Large, ultra-bright display - 4.3 in. wide screen display with white LED backlighting provides easy viewing of high-frequency data plots
• 350 MHz & 500 MHz models are fully upgradable to 1000 MHz
• Smart lithium-ion battery technology - 18 hour battery life with self calibrating "fuel gauge" for accurate capacity readings

LanTEK II offers the best speed, performance and price available today. Nine second Cat 5e and 14 second Cat 6 tests with full performance data plus 10 Gigabit Alien Crosstalk testing that's more than 4x faster than other systems make LanTEK II the ultimate copper certification platform. The patented universal adapter systems lets you certify most cabling with off-the-shelf patch cords saving time and money by eliminating the need for proprietary permanent link adapters.

The optional FiberTEK FDX modules provide the world's only dual wavelength, bidirectional fiber certification available that's more than 3x faster than existing testers. Three models provide the needed performance without the added expense; choose from 350 MHz/Cat 6, 500 MHz/Cat 6A or 1000 MHz/Cat7A all with accuracy independently verified by ETL.

LanTEK II also offers ultimate versatility with options for certification of TERA, GG45 and EC7 category 7/7A systems, plus M12 industrial Ethernet and coaxial test adapters.

Specifications LanTEK II :

Handset Dimensions	Height/Width/Depth: 10in/5in/2.1in (25.4cm/12.7cm/5.3cm)
Handset weight w/ battery	Display: 2.4lbs/1.1kg; Remote: 2.3lbs/1.0kg
Battery	Lithium ion, 7.4VDC, 6.6AH; Input: 12V/2A DC; Typical operating time: 18 hours (new battery running a Cat6 test every 2.5 minutes, full backlight); Charge time: 4 hours quick charge with battery removed from handset, 6 hours inside handset.
Input power	Handset: DC 12-15V, 2A; Line/mains power: AC 110-240V
Display	4.3" wide screen TFT, 480 x 272 pixel, 95 x 54mm viewable area
Connectivity	Adapter port: 168 pin ultra low crosstalk, mini-USB device port, USB host port (display handset only), four pin serial port (service use only), 1/8" talkset jack, power/charging jack
Frequency range	LanTEK II-350: 1-350MHz, LanTEK II-500: 1-500MHz, LanTEK II-1000: 1-1000MHz
Memory	Non-volatile flash, storage capacity for 1700 TIA-Cat 6 tests with graphs. Tests can be copied to USB flash drive, up to 64GB.
Measurements	Wire map, DC loop resistance length, capacitance, NEXT, insertion loss (formerly attenuation), ACR-N (formerly ACR), return loss, average impedance, propagation delay, delay skew, power sum NEXT, power sum ACR-N (formerly power sum ACR), ACR-F (formerly ELFEXT), power sum ACR-F (formerly power sum ELFEXT), alien crosstalk (with optional AXT testing kit)
Length measurement	0-2000 ft.; 1 ft. resolution, +/-(3% + 3 ft.)
Supported cable types	TIA/EIA Category 3, 4, 5, 5E, 6 and 6A: 100O
	ISO/IEC Class C, D, E, EA, F, FA: 100O
	Cat 6/6A Class E/EA RJ-45 permanent link adapters: shielded and un-shielded cable, universal adapters provide channel, permanent link and basic link measurements.
Supported connectors	Additional adapters: GG45, ARJ45, TERA, EC7 (MMCPRO3000), Coax 50-75O (BNC connector), M12 industrial
Tone generator	Integrated into display and remote handset, compatible with standard analog inductive probes, selectable tone (high/low/warble) 500/600 Hz, selectable pin output.
Input protection	100V @ 25mA
Operating temperature	0°C to 50°C, non-condensing
Storage temperature	-20°C to 70°C, non-condensing
Vibration/shock	MIL-PRF-28800 F, Class 3
Supported languages	Chinese, Czech, Danish, Dutch, English, French, German, Italian, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, Swedish
Accuracy	Baseline: Certified by ETL to meet IEC 61935 Level III/IIIe/IV; Channel/Permanent link: TIA 568-B.2-2 and IEC 61935 Level III/IIIe/IV
Warranty (LanTEK II/FiberTEK FDX)	One (1) Year from date of purchase
	Batteries and accessories are warranted 90 days from date of purchase
PC Software	Requirements: Microsoft Windows® XP or Vista, 512MB RAM, 500MB hard disk + 1GB for every 1,500 Category 6 tests

Specifications FiberTEK FDX :

Compatability	LanTEK II (any model)
Connector	User changeable adapter (SC, FC, ST), 2.5mm ferrule
Laser safety	Multi-mode 850 VCSEL: class 3, 5mW max; multi-mode 1300 laser: class 3, 5mW max; Single mode 1310 & 1550: class: 3, 5mW max
Power meter accuracy	± .5dB from 0dBm to -40dBm 850-1550nm; system dynamic range 40dB
Length accuracy	±3%; maximum distance measurement 3000m
Display resolution	Power/attenuation: 0.1dB, length: 0.1m/0.1ft